SE-Ingeniería Industrial 2020

Ingeniería Industrial (School of Engineering) 2020

 

Artículos científicos publicados por PDI del Departamento de Ingeniería Industrial (School of Engineering IQS) durante 2020.

Selecciona cada título para ampliar información (abstract, citaciones, altmétricas, etc.).

 

Comparative study of the flexural properties of ABS, PLA and a PLA-wood composite manufactured through fused filament fabrication

Autores/as:
Travieso-Rodriguez, J.A., Jerez-Mesa, R.; Llumà, Jordi; Gomez-Gras, Giovanni; Casadesus, Oriol

Publicación:
Rapid Prototyping Journal, 28 October 2020, v.27, n.1, p.81-92

Design and evaluation of an osteogenesis-on-a-chip microfluidic device incorporating 3D cell culture

Autores/as:
Bahmaee, Hossein; Owen, Robert; Boyle, Liam; Perrault, Cecile M.; Garcia-Granada, Andres A.; Reilly, Gwendolen C.; Claeyssens, Frederik

Publicación:
Frontiers in Bioengineering and Biotechnology, 08 September 2020, v.8, 557111

Estimation of industrial emissions during pyrolysis and combustion of different wastes using laboratory data

Autores/as:
Conesa, Juan A.; Ortuno, Núria; Palmer, Damià

Publicación:
Scientific Reports, 21 April 2020, v.10, n.1, 6750

Mechanical behavior of an additively manufactured poly-carbonate specimen: tensile, flexural and mode I fracture properties

Autores/as:
Sedighi, Iman; Ayatollahi, Majid R.; Bahrami, Bahador; Pérez-Martínez, Marco A.; Garcia-Granada, Andres A.

Publicación:
Rapid Prototyping Journal, 2020, v.26, n.2, p.267-277

Mechanical strengthening in S235JR steel sheets through vibration-assisted ball burnishing

Autores/as:
Llumà, Jordi; Gómez-Gras, Giovanni; Jerez-Mesa, Ramón; Rue-Mascarell, Jaume; Travieso-Rodriguez, J. Antonio

Publicación:
Metals, 28 July 2020, v.10, n.8, 1010

Mechanical study on the impact of an effective solvent support-removal methodology for FDM Ultem 9085 parts

Autores/as:
Chueca de Bruijn, Ariadna; Gómez-Gras, Giovanni; Pérez, Marco A.

Publicación:
Polymer Testing, May 2020, v.85, 106433

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

Autores/as:
Forés-Garriga, Albert; Pérez, Marco A.; Gómez-Gras, Giovanni; Reyes-Pozo, Guillermo

Publicación:
Material & Design, August 2020, v.193, 108810

Study of the human albumin role in the formation of a bacterial biofilm on urinary devices using QCM-D

Autores/as:
García-Bonillo, Cristina; Texidó, Robert; Reyes-Carmenaty, Guillermo; Gilabert-Porres, Joan; Borrós, Salvador

Publicación:
ACS Applied Bio Materials, 8 April 2020, v.3, n.5, p.3354-3364

The effect of in-plane layer orientation on mixed-mode I-II fracture behavior of 3D-printed poly-carbonate specimens

Autores/as:
Bahmari, Bahador; Ayatollahi, Majid R.; Sedighi, Iman; Pérez, Marco A.; Garcia-Granada, Andrés A.

Publicación:
Engineering Fracture Mechanics, 15 May 2020, v.231, 107018

Time-dependent mechanical properties in polyetherimide 3D-printed parts are dictated by isotropic performance being accurately predicted by the generalized time hardening model

Autores/as:
Salazar-Martin, A.G.; Garcia-Granada, A.A.; Reyes, G.; Gomez-Gras, G.; Puigoriol Forcada, J.M.

Publicación:
Polymers, 19 March 2020, v.12, n.3, 678