SE-Enginyeria Industrial 2020

Enginyeria Industrial (School of Engineering) 2020

 

Articles científics publicats per PDI del Departament d'Enginyeria Industrial (School of Engineering IQS) durant el 2020.

Selecciona cada títol per ampliar la informació (abstract, citacions, altmètriques, etc.).

 

Comparative study of the flexural properties of ABS, PLA and a PLA-wood composite manufactured through fused filament fabrication

Autors/es:
Travieso-Rodriguez, J.A., Jerez-Mesa, R.; Llumà, Jordi; Gomez-Gras, Giovanni; Casadesus, Oriol

Publicació:
Rapid Prototyping Journal, 28 October 2020, v.27, n.1, p.81-92

Design and evaluation of an osteogenesis-on-a-chip microfluidic device incorporating 3D cell culture

Autors/es:
Bahmaee, Hossein; Owen, Robert; Boyle, Liam; Perrault, Cecile M.; Garcia-Granada, Andres A.; Reilly, Gwendolen C.; Claeyssens, Frederik

Publicació:
Frontiers in Bioengineering and Biotechnology, 08 September 2020, v.8, 557111

Estimation of industrial emissions during pyrolysis and combustion of different wastes using laboratory data

Autors/es:
Conesa, Juan A.; Ortuno, Núria; Palmer, Damià

Publicació:
Scientific Reports, 21 April 2020, v.10, n.1, 6750

Mechanical behavior of an additively manufactured poly-carbonate specimen: tensile, flexural and mode I fracture properties

Autors/es:
Sedighi, Iman; Ayatollahi, Majid R.; Bahrami, Bahador; Pérez-Martínez, Marco A.; Garcia-Granada, Andres A.

Publicació:
Rapid Prototyping Journal, 2020, v.26, n.2, p.267-277

Mechanical strengthening in S235JR steel sheets through vibration-assisted ball burnishing

Autors/es:
Llumà, Jordi; Gómez-Gras, Giovanni; Jerez-Mesa, Ramón; Rue-Mascarell, Jaume; Travieso-Rodriguez, J. Antonio

Publicació:
Metals, 28 July 2020, v.10, n.8, 1010

Mechanical study on the impact of an effective solvent support-removal methodology for FDM Ultem 9085 parts

Autors/es:
Chueca de Bruijn, Ariadna; Gómez-Gras, Giovanni; Pérez, Marco A.

Publicació:
Polymer Testing, May 2020, v.85, 106433

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

Autors/es:
Forés-Garriga, Albert; Pérez, Marco A.; Gómez-Gras, Giovanni; Reyes-Pozo, Guillermo

Publicació:
Material & Design, August 2020, v.193, 108810

Study of the human albumin role in the formation of a bacterial biofilm on urinary devices using QCM-D

Autors/es:
García-Bonillo, Cristina; Texidó, Robert; Reyes-Carmenaty, Guillermo; Gilabert-Porres, Joan; Borrós, Salvador

Publicació:
ACS Applied Bio Materials, 8 April 2020, v.3, n.5, p.3354-3364

The effect of in-plane layer orientation on mixed-mode I-II fracture behavior of 3D-printed poly-carbonate specimens

Autors/es:
Bahmari, Bahador; Ayatollahi, Majid R.; Sedighi, Iman; Pérez, Marco A.; Garcia-Granada, Andrés A.

Publicació:
Engineering Fracture Mechanics, 15 May 2020, v.231, 107018

Time-dependent mechanical properties in polyetherimide 3D-printed parts are dictated by isotropic performance being accurately predicted by the generalized time hardening model

Autors/es:
Salazar-Martin, A.G.; Garcia-Granada, A.A.; Reyes, G.; Gomez-Gras, G.; Puigoriol Forcada, J.M.

Publicació:
Polymers, 19 March 2020, v.12, n.3, 678